외기용 습도 검출기

제품코드	G041071
판매 회사명	(주)신이콘텍
연락처	02-841-6616~8
홈페이지	-
제품홍보관	http://blog.yeogie.com/shinni

외기용 습도 검출기 (OUTSIDE HUMIDITY TRANSMITTER) SOH-110/420

[적용 (Applicaton)] The outside Transmitter "SOH" is an electronis Humidity Transmitter that measure the outside relative Humidity(RH) and convert the measurement into an electric signal. [유니트 조합 (Equipment Combinations)] This unit can be used with all system equipments that can receive output signals(0-10V d.c, 4-20mA) of the detector. [기술사양 (Technical Data)] . 조작전원(Power Supply) : 24V a.c. ±20% . 주파수(Frequency) : 50 or 60Hz . 소비전력(Power Consumption) : 0.35VA . 검출범위(Sensing Range) : 0~100%Rh . 20℃에서 검출정확도(Accuracy) : 20~90%Rh ±3%Rh . 출력신호(Output Signal) : 0~10V(4~20mA)d.c.≒0~100%Rh . 검출 소요시간(Sensing Time) : About 20 sec . 허용 주변온도(Ambient Temp) : -25~+70℃ . 허용 주변습도(Ambient Humi.) : 100%Rh . 배선(Wire) : 3wires, 1.0㎟ or Shield Cable . 무게(Weight) : 0.06kg . 하우징(Housing) : plastic case

[설치시주의사항 (Mounting Notes)] . The element must not be touched and should be protected from dust, water, spray and condensation. . The sensor element must not be exposed to organic solvents, sulptide gearing materials. . Select a location approx 1.5M above the floor for the sensor which is representative of the space to be controlled and where it will be readily affected by change in the general space temperature & humidity level. . The sensor location should also be reasonably clean and free from damp and condensation. . Fix with the bolts provided in pull box(50×100, 100×100) . To avoid the conductive current the wires should be seperated from power lines. . Use the shield line when wiring.

[결선방법 (Wiring Diagram)]

[외형치수 (Dimensions)]

※ 출처 : 여기에 기계플라자 - [G041071] 외기용 습도 검출기