카메라모듈 검사기

제품코드	G055650
판매 회사명	라온피플
연락처	031-707-7085
홈페이지	-
제품홍보관	http://blog.yeogie.com/laonpeople

LPMC 500 - MIPI 4-Lane / USB3.0 BOARD

라온피플은 국내 최초로 USB3.0 I/F를 지원하는 MIPI 4-Lane 영상 캡춰 보드를 개발했습니다.. 라온피플의 MIPI 4-Lane / USB3.0 solution은 1개의 PC에서 8개의 capture board를 지원하고 고속 capture 시스템을 사용하여 test 시간을 크게 단축시켜 전체적인 카메라 모듈 테스트 장비 비용을 저렴하게 구현하는 것이 가능해졌습니다. 또한 카메라 모듈 테스트 장비에 적합한 Machine Vision Camera, 탁월한 DPM-type barcode decoding 성능을 보유한 바코드 리더기까지 turn-key solution 제공이 가능합니다.

HW Specification

모델명	LPMC-500SV	LPMC-500CV	LPMC-500MF
Input Interface format	MIPI 1,2,3,4 Lane, CCIR601 Conventional parallel interface	MIPI 1,2,3,4 Lane, CCIR601 Conventional parallel interface	MIPI 1,2,3,4 Lane, CCIR601 Conventional parallel interface
Image data upload	USB 3.0 Interface, Maximum data rates - 2.5Gbps	USB 3.0 Interface, Maximum data rates - 2.5Gbps	USB 3.0 Interface, Maximum data rates - 2.5Gbps
Internal Buffer Memory	512Mbit DDR2(x16) 1ea	512Mbit DDR2(x16) 1ea	512Mbit DDR2(x16) 1ea
Connectors for camera Interface	Connector 70 pins 2.54mm pitch	MIPI 40 pins, Parallel 20*2 pins, SPI 4 pins, 2.54mm pitch	MIPI 40 pins, Parallel 20*2 pins, SPI 4 pins, 2.54mm pitch
Configuration for LPMC/Camera module registers	Through USB packet	Through USB packet	Through USB packet
Number of Power for Camera	1 Fixed 12V source and 1 Fixed 5V source, 4 Programmable power source	1 Fixed 12V source or 1 Fixed 5V source(Selectable) 5 Programmable power source	1 Fixed 12V source or 1 Fixed 5V source(Selectable) 5 Programmable power source
Sensor Clock	Programmable 1KHz ~ 68MHz, by programming the Clock Generator	Programmable 1KHz ~ 68MHz, by programming the Clock Generator	Programmable 1KHz ~ 68MHz, by programming the Clock Generator
Power Supply	DC +12.0V / 2A	DC +12.0V / 2A	DC +12.0V / 2A
USB3.0 Interface	USB3.0 Standard B Connector.	USB3.0 Standard B Connector.	USB3.0 Standard B Connector.
Button	-	-	Power / Start / Stop
Dimension	137.0mm x 110.0mm	110.0mm x 80.0mm	180mm x 180mm x 46.8mm

HW Specification

모델명	LPMC-500DC (LPMC-500CV 또는 LPMC-500SV와 결합해서 사용)
Image Sensor Interface	MIPI 4 Lane(support for dual MIPI Sensor) CCIR-601 default 16bit. SPI 1 Channel / Usable Set GPIO 4ea.
DC test	Open/Short test for 51 pins(MIPI, Parallel, SPI I/F) Open/Short Test Time : under 1 sec. Leakage Test for 51 pins Leakage test time : under 1 sec Power consumption test : Dynamic / Standby current test Power consumption test time : under 1 sec (exception sensor initial time)
Internal Buffer Memory	1Gbit DDR2.
Connectors for camera Interface	MIPI : 40pins/ 2.54mm Connector(Straight Male) Parallel :40pins / 2.54mm Connector(Straight Male) SPI : 4pins / 2.54mm Connector(Straight Male)
Voltage adjustable for 5 Power channels (For image sensor)	CH1 : 0.9 ~3V/ 500mA (Sensor core power) CH2~CH5 : 0.9 ~ 4V/ 500mA (Sensor I/O) Fixed 5V or 12V for One Power channel(max 500mA)
Current measurement range	Dynamic : 0~500mA / 0.1mA step/ 1~2% Accuracy Standby : 0~1mA / 0.2uA step/ 1~2% Accuracy
Sensor Main Clock	Usable Set. (Programming OSC) : Up to 68Mhz.
Power Supply	DC +12.0V / 2A
Dimensions (LPMC-500CV와 결합시)	110mm(H) x 80mm(V) x 31.4mm(D)

Figure

HW Feature (LPMC-500SV 예시)

※ 출처 : 여기에 기계플라자 - [G055650] 카메라모듈 검사기