Turning

신제품Turning
제품코드	G020511
판매가격	가격협의
제품분류	공작기계/금속가공 > 터닝기
제품사양	하단표기
모델명	Turning
제조사	MIRCONA
판매지역	전국
거래방식	직거래
제조년도	2013 년
A/S여부	가능
설치 및 시운전	가능
세금계산서	가능
제조국가	-

제품 QR코드

등록자정보

회사명	(주)청도기공	담당자	청도기공
전화번호	02-2676-4155	휴대전화	***
이메일	cdmt@chol.com	홈페이지	http://www.cdmt.co.kr
주소	서울특별시 구로구 구로중앙로 198 (구로동, 구로기계공구상가) A-6-103	제품홍보관	http://blog.yeogie.com/cdmt

제품상세정보

Turning tools to ISO

MIRCONA is offering a variety of? clamping systems for external and internal turning to cover most turning operations, in accordance with the following:

The PMC-system The MIRCONA PMC-clamping system is intended for roughing or finishing machining with negative double- or single-sided inserts with or without a centre hole. The system allows the application of three different clamping systems - P, M and C in one and the same tool holder.?

 

The S-system
	The MIRCONA S-system? with centre-screw fixing is intended for finishing to medium roughing with positive single-sided inserts with a centre hole.

 

The C-system
	The MIRCONA C-clamping system is intended for finishing and roughing with positive single-sided inserts without a centre hole.

 

The C-system for ceramic inserts
	The MIRCONA C-system for ceramic inserts is intended for roughing or finishing with negative ceramic inserts without a hole. The system offers two alternative clamping functions; with a thrust plate especially for machining of cast iron, or with a chip-breaker for machining of steel.

 

MIRCONA turning tools in performance COROMANT CAPTO? MIRCONA will upon request as special purpose tool, manufacture the range of ISO turning tools in performance COROMANT CAPTO? . Manufacturing and marketing of this range on COROMANT CAPTO? tools is regulated by a licence from SANDVIK COROMANT. MIRCONA tools in performance COROMANT CAPTO? are thus completely interchangeable with COROMANT CAPTO?.

ISO throw-away inserts for turning
MIRCONA offers a wide range of throw-away inserts in uncoated or coated carbide grades, cermets and ceramics for turning. 6 CVD- and 4 PVD-coated carbide grades as well as 6 ceramic grades are offered as standard for all machining operations from extreme finishing to heavy roughing in most materials.? A large number of different cutting geometris adapted to everything from extreme finishing to heavy roughing are stocked as standard.

※ 출처 : 여기에 기계플라자 - [G020511] Turning